National Instruments NI PXIe-8840, Руководство пользователя

Страница: 23 / 24

2. Press <F9> to load BIOS defaults.
3. Answer
Y
(Yes) to the verification prompt.
4. Select
Save and Exit Setup
.
2. Second Method
1. Power off the chassis.
2. Remove the controller from the chassis.
3. Press the Clear CMOS button (SW1) for 2 to 3 seconds as shown in the
following figure.
4. Reinstall the controller in the chassis.
Figure 7. Clearing the CMOS Contents
1
1. Push-Button Switch SW1
Worldwide Support and Services
The National Instruments website is your complete resource for technical support.
At ni.com/support , you have access to everything from troubleshooting and
© National Instruments
23
PXIe-8840 Quad Core