![background image](http://html1.mh-extra.com/html/national-instruments/ni-dcm-23-series/ni-dcm-23-series_getting-started-manual_3583134002.webp)
2
|
ni.com
|
NI DCM-23XX Getting Started Guide
Caution
Do not operate the DCM in a manner not specified in this document.
Product misuse can result in a hazard. You can compromise the safety protection built
into the product if the product is damaged in any way. If the product is damaged,
return it to NI for repair.
Caution
Do not disconnect the power supply wires and connectors from the
controller unless power has been switched off.
About This Manual
This document explains how to begin using the National Instruments DCM family of devices.
The scope is limited to focus on initial DCM startup and basic operation using the DCM Starter
Harness and DSI software. For more detailed information on DCM hardware or software, refer
to the
Preparing the Environment
Ensure that the environment in which you are using the DCM meets the following specifications.
Note
Refer to the device specifications on
specifications
.
Identifying the Hardware
The following section includes identification of DCM kit contents and all other required
components.
Verifying Kit Contents
Verify that the following item(s) are included in the DCM kit:
•
DCM with rack-mount end plates
•
NI DCM-23XX Getting Started Guide
•
NI DCM-23XX Specifications Guide
Operating temperature
(IEC 60068-2-1, IEC 60068-2-2)
0 °C to 55°C
Operating humidity (IEC 60068-2-56)
10% RH to 90% RH, non-condensing
Pollution Degree (IEC 60664)
2
Maximum altitude
2,000 m
Содержание NI DCM-23 Series
Страница 15: ......