National Instruments NI DCM-23 Series, Руководство по началу работы

Страница: 7 / 16

NI DCM-23XX Getting Started Guide | © National Instruments | 7
Caution
Damage may occur if the PDU-2300 is not appropriately configured for
the selected supply voltage before connecting power.
Figure 2.
Fuse Placement for 12 V and 24 V Setup
Connecting the DCM to Power
Powering the DCM with the DCM Starter Harness and PDU-2300 requires a 12 V or 24 V, 180
W minimum, external DC power supply. Recommended power supplies are listed in Table 1
below. The light-duty power supply leads (14 AWG) included in the DCM Starter Harness kit
are recommended only for bench-top applications which require less than 15 A of current. The
heavy-duty leads (8 AWG) included in the DCM Starter Harness kit are recommended for all
other applications.
What to Use
• Starter harness light-duty (<15A) or heavy-duty power supply leads
• Wrench, 1/2-in.
• NI recommended power supply
Table 1. Recommended Power Supplies
Power Supply Part Number
PULS QS10.121 Power Supply
(12 VDC, 15 A, 100-240 VAC/110-150 VDC Input) 783168-01
NI PS-17 Industrial Power Supply
(24 VDC, 20 A, 100-240 VAC/110-150 VDC Input) 781095-01
Tripp Lite PR 60
(13.8 VDC, 60 A, 120 VAC Input) PR 60
TDK Lambda Genesys 1500W
(0-30 VDC Variable, 0-50 A Variable, 85-265 VAC input) GEN 30-50
12 V Setup
F12
7.5 A Fuse
F14
Empty
F13
7.5 A Fuse
24 V Setup
F12
Empty
F14
7.5 A Fuse
F13
Empty