NI 9514 Operating Instructions and Specifications
|
© National Instruments
|
9
NI 9514 Connection Options
National Instruments offers several options for connecting the
NI 9514 to servo drives. You can use the NI 9514/16 to AKD cable
to connect the NI 9514 to the AKD analog servo drive and AKM
series servo motors from NI. To connect to third-party servo drives
use the NI 951x Cable and Terminal Block Bundle. Refer to
Figure 3 for the 37-pin terminal block pin assignments. Refer to the
NI 951x User Manual
, which you can download from
ni.com/
manuals
, for information about additional connection accessories
and cabling recommendations.
Tip
NI offers AKD analog servo drives and matched
servo motors. Refer to
Getting Started with NI 9514/16
C Series Drive Interface Modules and AKD Analog Servo
Drives
for installation and configuration information.
Refer to the
Getting Started with NI 951x C Series Drive
Interface Modules and LabVIEW
for information about
using the NI 9514 with other devices.
How to Connect the NI 9514 to Drives and I/O
Complete the following steps to connect the NI 9514 servo drive
interface module to drives and other I/O.
Содержание NI 9514
Страница 1: ...NI 9514...