NI 9148 Operating Instructions and Specifications
8
ni.com
Complete the following steps to install a C Series I/O module in the chassis.
1.
Make sure that no I/O-side power is connected to the I/O module. If the
system is in a nonhazardous location, the chassis power can be on
when you install I/O modules.
2.
Align the I/O module with an I/O module slot in the chassis as shown
in Figure 10. The module slots are labeled 1 to 8, left to right.
Figure 10.
Installing an I/O Module in the Chassis
3.
Squeeze the latches and insert the I/O module into the module slot.
4.
Press firmly on the connector side of the I/O module until the latches
lock the I/O module into place.
5.
Repeat these steps to install additional I/O modules.
1
Insertion Groove
2
L
a
tch
1
2
