National Instruments NI-488.2M Скачать руководство пользователя страница 16

Страница: 16 / 178

© National Instruments Corp.

1-1

NI-488.2M SRM for OS/2

Chapter 1
NI-488.2M Software Description

This chapter describes the NI-488.2M software package and explains how the
software works with your OS/2 system.

The NI-488.2M Software Package

The following section highlights important elements of the NI-488.2M software
for OS/2 and describes the function of each element.

NI-488.2M Driver and Driver Utilities

The distribution disk contains the following driver and utility files.

•

readme.doc

is a documentation file that contains important information

about the NI-488.2M software and a description of any new features.
Before you use the software, read this file for the most recent information.

•

install.cmd

is an OS/2 command file that performs the software

installation. It does not modify your

config.sys

file.

•

gpib.sys

is the software driver file that is loaded at system startup by

OS/2.

•

gpib.ddp

is a device driver profile. This file is used by the OS/2

command,

ddinstal

, to control the installation process.

•

ibic.exe

is an interactive control program that you use to communicate

with the GPIB devices interactively using NI-488.2 functions and routines.
It helps you to learn the NI-488.2 routines and to program your instrument
or other GPIB devices.

•

ibconf.exe

is a software configuration program that changes the

configuration parameters of the NI-488.2M software.

•

ibtest.exe

is the software installation test.

Содержание NI-488.2M


















































































































































































Результаты поиска

Содержание NI-488.2M

Отзывы:

Похожие инструкции для NI-488.2M

Бренды по названию

Популярные бренды

National Instruments NI-488.2M, Руководство по программному обеспечению

Результаты поиска

Содержание NI-488.2M

Отзывы:

Похожие инструкции для NI-488.2M

Бренды по названию

Популярные бренды