National Instruments Network Adapter NI PXIe-1075 Скачать руководство пользователя

Страница: 37 / 78

Chapter 2

Installation and Configuration

National Instruments Corporation

2-17

NI PXIe-1075 User Manual

The capability documentation for the NI PXIe-1075 chassis is contained in
the

chassis.ini

file on the software media that comes with the chassis.

The information in this file is combined with information about the system
controller to create a single system initialization file called

pxisys.ini

(PXI System Initialization). The system controller manufacturer either
provides a

pxisys.ini

file for the particular chassis model that contains

the system controller or provides a utility that can read an arbitrary

chassis.ini

file and generate the corresponding

pxisys.ini

file.

System controllers from NI provide the

pxisys.ini

file for the

NI PXIe-1075 chassis, so you should not need to use the

chassis.ini

file. Refer to the documentation provided with the system controller or to

ni.com/support

for more information on

pxisys.ini

and

chassis.ini

files.

Device drivers and other utility software read the

pxisys.ini

file to

obtain system information. The device drivers should have no need to
directly read the

chassis.ini

file. For detailed information regarding

initialization files, refer to the PXI Express specification at

www.pxisa.org

Содержание Network Adapter NI PXIe-1075















































































Результаты поиска

Содержание Network Adapter NI PXIe-1075

Отзывы:

Похожие инструкции для Network Adapter NI PXIe-1075

Бренды по названию

Популярные бренды

National Instruments Network Adapter NI PXIe-1075, Руководство пользователя

Результаты поиска

Содержание Network Adapter NI PXIe-1075

Отзывы:

Похожие инструкции для Network Adapter NI PXIe-1075

Бренды по названию

Популярные бренды