National Instruments GPIB-SCSI-A, Руководство пользователя

Страница: 407 / 413

Index
© National Instruments Corp. I-25 GPIB-SCSI-A User Manual
standard 50-pin connector, D-7
TERMPWR pin, D-10
SCSI phase-handling, 6-9
Bus Free, D-2
Command, D-3
commands not requiring data phase, 6-10
commands requiring Data In phase, 6-10
commands requiring Data Out phase, 6-11
Data In/Data Out, D-4
disconnection/reconnection, 6-11 to 6-12
Message In/Message Out, D-4
Selection/Reselection, D-2 to D-3
Status, D-4
SCSI port, 1-9
SCSI terminating resistors, 2-8 to 2-9
Select a SCSI Target With SCSI ATN* Asserted function. See selwa
function.
Select a SCSI Target Without SCSI ATN* Asserted function. See selwo
function.
selwa function, 7-83 to 7-84
example, 7-84
syntax and description, 7-83 to 7-84
See also selwo function.
selwo function, 7-85
example, 7-85
syntax and description, 7-85
See also selwa function.
Send Diagnostic function. See sndia function.
Send GPIB Commands function. See cmd function.
Send Interface Clear function. See sic function.
sense data, obtaining, 4-4
sense keys
ABORTED COMMAND, B-17
ERROR, B-17
ILLEGAL REQUEST, B-17
NO SENSE, B-17
serial poll functions, S mode
chart, 4-12
rsp, 5-79 to 5-81
rsv, 5-82 to 5-83
serial polling
asserting EOI* signal with Switch 4, 3-9
GPIB operation, 6-24
serial poll status byte, 6-24