©
National Instruments Corp.
3
FP-AI-100 and cFP-AI-100
3. Using a number 2 Phillips screwdriver with a shank of at least
64 mm (2.5 in.) length, tighten the captive screws to 1.1 N
⋅
m
(10 lb
⋅
in.) of torque. The nylon coating on the screws prevents
them from loosening.
Figure 2.
Installing the cFP-AI-100
Wiring the [c]FP-AI-100
The FP-TB-
x
terminal base has connections for each of the eight
input channels and for an optional external supply to power field
devices. The cFP-CB-
x
connector block provides the same
connections.
Table 1 lists the terminal assignments for the signals associated
with each channel. The terminal assignments are the same for the
FP-TB-
x
terminal bases and the cFP-CB-
x
connector blocks.
1
cFP-AI-100
2
Captive Screws
3
cFP Controller Module
4
Screw Holes
5
cFP Backplane
2
2
1
3
5
4
4
