National Instruments CompactRIO cRIO-9066, Начало работы

Страница: 8 / 17

2
2
3
1
1. Verify that power is not connected to the I/O connector(s) on the C Series
module. If the system is in a nonhazardous location, the cRIO-9066 can be
powered on when you install modules.
2. Press the latches on the C Series module.
3. Align the C Series module with a slot and seat it in the slot until the latches
lock in place.
Removing C Series Modules
Verify that power is not connected to the I/O connector(s) on the C Series module
before you remove a module from the cRIO-9066. If the system is in a nonhazardous
location, the cRIO-9066 can be powered on when you remove modules.
Connecting the cRIO-9066
The cRIO-9066 has the following connectors, LEDs, and buttons.
Connecting the cRIO-9066 to Ground
You must connect the cRIO-9066 grounding terminal to the grounding electrode
system of the facility.
What to Use
■
Ring lug
■
Wire, 2.1 mm
2
(14 AWG) or larger
ni.com
8
cRIO-9066 Getting Started