National Instruments CompactRIO cRIO-9066, Начало работы

Страница: 7 / 17

Note
Do not install a device if it appears damaged in any way.
3. Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.
Verifying the Kit Contents
Verify that the following items are included in the cRIO-9066 kit.
Installing Software on the Host Computer
Before using the cRIO-9066, you must install the following application software and
device drivers on the host computer in this order:
1. LabVIEW 2014 or later
2. LabVIEW Real-Time Module 2014 or later
3. LabVIEW FPGA Module 2014 or later
[1]
4. NI CompactRIO Device Drivers 14.0 or later
For minimum software support information, visit ni.com/info and enter the Info
Code swsupport.
1
LabVIEW FPGA Module is not required when using Scan Interface mode. To
program the user-accessible FPGA on the cRIO-9066, LabVIEW FPGA Module is
required.
Installing C Series Modules
Complete the following steps to install a C Series module.
© National Instruments
7
cRIO-9066 Getting Started