National Instruments CompactRIO cRIO-9066, Начало работы

Страница: 17 / 17

LED Pattern Indication
This pattern may also indicate that the user has forced the cRIO-9066 to boot
into safe mode by pressing the reset button for longer than five seconds or
by enabling safe mode in MAX. Refer to the Measurement & Automation
Explorer (MAX) Help for information about safe mode.
Blinks four times
and pauses
The cRIO-9066 is in safe mode. The software has crashed twice without
rebooting or cycling power between crashes.
Continuously
blinks
The cRIO-9066 has not booted into NI Linux Real-Time. The cRIO-9066 either
booted into an unsupported operating system, was interrupted during the
boot process, or detected an unrecoverable software error.
On momentarily The cRIO-9066 is booting. No action required.
Off The cRIO-9066 is in run mode. Software is installed and the operating system
is running.
Where to Go Next
NI Services
Visit ni.com/support to find support resources including documentation,
downloads, and troubleshooting and application development self-help such as
tutorials and examples.
Visit
ni.com/services to learn about NI service offerings such as calibration options,
repair, and replacement.
Visit
ni.com/register to register your NI product. Product registration facilitates
technical support and ensures that you receive important information updates from
NI.
NI corporate headquarters is located at 11500 N Mopac Expwy, Austin, TX,
78759-3504, USA.
© National Instruments
17
cRIO-9066 Getting Started
© 2022 National Instruments Corporation.