National Instruments CompactRIO cRIO-9066, Начало работы

Страница: 10 / 17

LED Color LED Pattern Indication
— Off The cRIO-9066 is powered off.
What to Use
■
Screwdriver, 2.54 mm (0.10 in.) flathead
■
Power supply, 9 V to 30 V, 25 W maximum
NI recommends the power supply listed in the following table for the cRIO-9066.
Table 2.
NI Power Supplies
Power Supply Part Number
NI PS-15 Industrial Power Supply (24 V DC, 5 A, 100 V AC to 120 V AC/200 V AC to
240 V AC input)
781093-01
What to Do
Complete the following steps to connect a power supply to the cRIO-9066.
1. Ensure that your power supply is powered off.
2. Remove the power connector from the cRIO-9066.
Caution
Do not tighten or loosen the terminal screws on the power
connector while the cRIO-9066 is powered on.
3. Connect the power supply to the power connector, as shown in the following
figure.
Figure 1.
cRIO-9066 Power Connections
Power Connector
C
V
Power Supply
+
–
Note
The C terminals are internally connected to each other.
4. Tighten the terminal screws on the power connector to 0.20 N · m to 0.25 N · m
(1.8 lb · in. to 2.2 lb · in.) of torque.
ni.com
10
cRIO-9066 Getting Started