manualshive.com logo in svg

National Instruments AT-MIO-16D, Руководство пользователя

Пользовательский мануал для National Instruments AT-MIO-16D доступен для бесплатного скачивания на manualshive.com. Этот мануал содержит подробные инструкции по использованию продукта, чтобы помочь вам максимально эффективно использовать его функционал. Спешите загрузить вашу копию прямо сейчас!

Поделиться
Скачать
background image

Limited Warranty

The AT-MIO-16D is warranted against defects in materials and workmanship for a period of one year from the date
of shipment, as evidenced by receipts or other documentation.  National Instruments will, at its option, repair or
replace equipment that proves to be defective during the warranty period.  This warranty includes parts and labor.

The media on which you receive National Instruments software are warranted not to fail to execute programming
instructions, due to defects in materials and workmanship, for a period of 90 days from date of shipment, as
evidenced by receipts or other documentation.  National Instruments will, at its option, repair or replace software
media that do not execute programming instructions if National Instruments receives notice of such defects during
the warranty period.  National Instruments does not warrant that the operation of the software shall be uninterrupted
or error free.

A Return Material Authorization (RMA) number must be obtained from the factory and clearly marked on the
outside of the package before any equipment will be accepted for warranty work.  National Instruments will pay the
shipping costs of returning to the owner parts which are covered by warranty.

National Instruments believes that the information in this manual is accurate.  The document has been carefully
reviewed for technical accuracy.  In the event that technical or typographical errors exist, National Instruments
reserves the right to make changes to subsequent editions of this document without prior notice to holders of this
edition.  The reader should consult National Instruments if errors are suspected.  In no event shall National
Instruments be liable for any damages arising out of or related to this document or the information contained in it.

E

XCEPT AS SPECIFIED HEREIN

, N

ATIONAL 

I

NSTRUMENTS MAKES NO WARRANTIES

, 

EXPRESS OR IMPLIED

,

AND SPECIFICALLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE

.  C

USTOMER

'

S RIGHT TO RECOVER DAMAGES CAUSED BY FAULT OR NEGLIGENCE ON THE PART

OF 

N

ATIONAL 

I

NSTRUMENTS SHALL BE LIMITED TO THE AMOUNT THERETOFORE PAID BY THE CUSTOMER

.

N

ATIONAL 

I

NSTRUMENTS WILL NOT BE LIABLE FOR DAMAGES RESULTING FROM LOSS OF DATA

, 

PROFITS

,

USE OF PRODUCTS

, 

OR INCIDENTAL OR CONSEQUENTIAL DAMAGES

, 

EVEN IF ADVISED OF THE POSSIBILITY

THEREOF

.  This limitation of the liability of National Instruments will apply regardless of the form of action,

whether in contract or tort, including negligence.  Any action against National Instruments must be brought within
one year after the cause of action accrues.  National Instruments shall not be liable for any delay in performance due
to causes beyond its reasonable control.  The warranty provided herein does not cover damages, defects,
malfunctions, or service failures caused by owner's failure to follow the National Instruments installation, operation,
or maintenance instructions; owner's modification of the product; owner's abuse, misuse, or negligent acts; and
power failure or surges, fire, flood, accident, actions of third parties, or other events outside reasonable control.

Copyright

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or
mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or
in part, without the prior written consent of National Instruments Corporation.

Trademarks

LabVIEW®, NI-DAQ®, and RTSI® are trademarks of National Instruments Corporation.

Product and company names listed are trademarks or trade names of their respective companies.

Содержание AT-MIO-16D




































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AT-MIO-16D

DayTronic System 10 User Manual Book preview
System 10
Бренд: DayTronic Страницы: 414
WaterLogic WL900 Service Manual preview
WL900
Бренд: WaterLogic Страницы: 29
WaterCop SmartConnect Owner'S Manual preview
SmartConnect
Бренд: WaterCop Страницы: 4
salmson Siriux Series Installation And Starting Instructions preview
Siriux Series
Бренд: salmson Страницы: 195
PACH & COMPANY AeGIS 8000 PLUS Installation And Programming Manual preview
AeGIS 8000 PLUS
Бренд: PACH & COMPANY Страницы: 30
NaanDanJain Dan Fogger Manual preview
Dan Fogger
Бренд: NaanDanJain Страницы: 12
Datavideo ITC300HP2K Instruction Manual preview
ITC300HP2K
Бренд: Datavideo Страницы: 40
M-E ADF-710 Operating & Assembly Instructions preview
ADF-710
Бренд: M-E Страницы: 72
AMGO Hydraulics OH-15 Installation And Service Manual preview
OH-15
Бренд: AMGO Hydraulics Страницы: 40
Commax CDV-70KR3 User Manual preview
CDV-70KR3
Бренд: Commax Страницы: 15
Ravaglioli RAV4352 Manual preview
RAV4352
Бренд: Ravaglioli Страницы: 104
Measurement Computing USB-1408FS-Plus User Manual preview
USB-1408FS-Plus
Бренд: Measurement Computing Страницы: 29
GRS Airtact Operation And Maintenance Manual preview
Airtact
Бренд: GRS Страницы: 4
Poweramp Bar Lift Owner & User Manual preview
Bar Lift
Бренд: Poweramp Страницы: 40
PROLIFTS VMB HDT-8 Operating Instructions & User Manual preview
VMB HDT-8
Бренд: PROLIFTS Страницы: 44
ABB IEC 61850 Quick Start Manual preview
IEC 61850
Бренд: ABB Страницы: 4
SKF IMx-16 User Manual preview
IMx-16
Бренд: SKF Страницы: 63
ZENDEX GO JAK G4107 Manual preview
GO JAK G4107
Бренд: ZENDEX Страницы: 10

Бренды по названию

Популярные бренды

Загрузить еще бренды