©
National Instruments Corporation
9
Getting Started with the NI 7831R
Windows finishes installing the software, click
Finish
. The
NI PCI-7831R appears under RTX Drivers as
NI-7831R RTX
Supported
.
8.
In the Device Manager window, select
View»Resources by
connection
.
9.
In the Device Manager window, expand
Interrupt Request (IRQ)
.
Make sure that the NI PCI-7831R is not sharing an IRQ with any other
devices. Refer to the
Venturcom RTX Runtime Help
for information
about modifying a PCI device.
10. Reboot your computer.
11. Select
Start»Run
. In the Run window, enter
net start nirtrtx
and click
OK
.
The PCI-7831R now supports RTX. When you launch LabVIEW, the
PCI-7831R appears in the
LabVIEW Execution Target
menu as
FPGA
Device (PCI-7831R) visa://localhost::RTRTX::0/RIO0::INSTR
.
Removing RTX Support
Complete the following steps to remove RTX support from the PCI-7831R.
1.
Close all NI software.
2.
Select
Start»Program Files»Venturcom RTX»RTX»RTX
Properties
.
3.
On the
Plug and Play
tab, right-click
NI-7831R
and select
Remove
RTX INF Support
.
4.
Click
Apply
. RTX Properties returns a Warning dialog box. Click
OK
.
5.
In the RTX Properties window, click
OK
.
6.
Right-click
My Computer
and select
Properties
.
7.
Select the
Hardware
tab and click
Device Manager
.
8.
For Windows XP, expand
Rtx Drivers
, right-click
NI-7831R RTX
Supported
and select
Update Driver
.
You have removed RTX support for the PCI-7831R.