Getting Started with the NI 7831R
12
ni.com
Cabling Options
Accessing the signals on the I/O connectors requires at least one cable and
one signal accessory. Table 1 summarizes the National Instruments cables
available for use with the NI 7831R device.
Documentation Resources
Refer to the following documentation for information about the
LabVIEW FPGA Module, R Series hardware, and VIs necessary
for your application.
•
LabVIEW FPGA Module Release Notes—
describes the software
installation and other known software issues
•
LabVIEW FPGA Module User Manual
—describes the LabVIEW
FPGA Module software and techniques for building applications in
LabVIEW with the LabVIEW FPGA Module
•
NI 7831R User Manual
—describes the electrical and mechanical
aspects of the PXI-7811R device and contains information concerning
its operation and programming
Table 1.
Cabling Options
Cable
Connector
Description
SH68-C68-S
MIO/DIO
For connecting signals from the MIO or DIO
connector to the NI SCB-68 terminal block.
SHC68-68-RMIO
MIO
For connecting signals from the MIO connector to
the SCB-68 terminal block.
Improves signal integrity and noise immunity.
Provides shielding on all AI channels and an overall
analog shield to reduce digital-to-analog crosstalk.
NSC68-262650
MIO
For direct connection of the NI 7831R to 5B and
SSR analog and digital signal conditioning
backplanes.
Routes signals to connectors that attach directly
to 5B backplanes (for analog signals) and SSR
backplanes (for digital signals).
NSC68-5050
DIO
For direct connection of the NI 7831R and
SSR backplanes.
Routes signals to connectors that attach directly to
SSR backplanes.