National Instruments 7831R, Начало работы

Страница: 3 / 14

© National Instruments Corporation 3 Getting Started with the NI 7831R
PCI-7831R with Windows 2000/XP
Use the following items to set up and use the PCI-7831R with
Windows 2000/XP.
❑
PCI-7831R device
❑
The following software packages:
– LabVIEW 7.1 or later
– LabVIEW FPGA Module 1.1 or later—required to develop
custom FPGA VIs for the PCI-7831R device
– NI-RIO 1.1 or later—included with the PCI-7831R
❑
Pentium-based PCI computer running Windows 2000/XP
❑
At least one cable and device for connecting signals to the PCI-7831R
PXI-7831R with the LabVIEW Real-Time Module for ETS
Use the following items to set up and use the PXI-7831R with the
LabVIEW FPGA Module and the LabVIEW Real-Time Module.
❑
PXI-7831R device
❑
The following software packages:
– LabVIEW 7.0 or later
– LabVIEW Real-Time Module for ETS 7.0 or later
– LabVIEW FPGA Module 1.0 or later—required to develop
custom FPGA VIs for the PXI-7831R device
– NI-RIO 1.0 or later—included with the PXI-7831R
❑
PXI/CompactPCI chassis and real-time PXI controller
❑
One of the following host computers, depending upon your
application, running Windows 2000/XP:
– PC
– Laptop computer
– PXI/CompactPCI embedded controller
❑
At least one cable and device for connecting signals to the PXI-7831R
❑
CAT 5 Ethernet crossover cable if the real-time PXI system is not
configured on a network. To connect the PXI system to a network port,
use a standard CAT 5 10/100Base-T Ethernet cable.