National Instruments Corporation SC-207 Series Скачать руководство пользователя страница 11

Страница: 11 / 91

About This Manual

SC-207X Series User Manual

xii

© National Instruments Corporation

Conventions Used in This Manual

The following conventions are used in this manual:

bold

Bold text denotes menus, menu items, or dialog box buttons or options.

bold italic

Bold italic text denotes a note, caution, or warning.

italic

Italic text denotes emphasis, a cross reference, or an introduction to a key
concept.

monospace

Text in this font is used for function names.

SC-206X Series

SC-206X Series refers to SC-2060, SC-2061, or SC-2062 boards.

DIO board

DIO board refers to the NB-DIO-24, NB-DIO-32F, NB-DIO-96,
MC-DIO-24, MC-DIO-32F, PC-DIO-24, AT-DIO-32F, and PC-DIO-96
boards.

DIO-24

DIO-24 refers to the NB-DIO-24, MC-DIO-24, and PC-DIO-24 boards.

DIO-32F

DIO-32F refers to the NB-DIO-32F, MC-DIO-32F, and AT-DIO-32F
boards.

Lab/1200 Series

Lab/1200 Series refers to the Lab-LC, Lab-NB, Lab-PC, and Lab-PC+
boards, and the DAQCard-1200, DAQPad-1200, and PCI-1200 devices.

MIO-16

MIO-16 refers to the NB-MIO-16, NB-MIO-16X, MC-MIO-16,
AT-MIO-16, AT-MIO-16D, AT-MIO-16F-5, and AT-MIO-16X boards.

NI-DAQ

NI-DAQ refers to the NI-DAQ software for PC compatibles or Macintosh
unless otherwise stated.

TIO-10

TIO-10 refers to the PC-TIO-10 board.

Abbreviations, acronyms, metric prefixes, and symbols are listed in the Glossary.

Related Documentation

The following National Instruments documents contain information that you may find helpful as
you read this manual:

•

Your DAQ hardware manuals

•

BNC-208X Series User Manual

•

SC-205X User Manual

Содержание SC-207 Series




























































































Результаты поиска

Содержание SC-207 Series

Отзывы:

Похожие инструкции для SC-207 Series

Бренды по названию

Популярные бренды

National Instruments Corporation SC-207 Series, Руководство пользователя

Результаты поиска

Содержание SC-207 Series

Отзывы:

Похожие инструкции для SC-207 Series

Бренды по названию

Популярные бренды