National Instruments Corporation SC-207 Series Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 91

background image

© National Instruments Corporation

5-1

SC-207X Series User Manual

Chapter 5
Installation and Connections

This chapter explains how to install and make connections to the SC-207X Series boards.

Hardware Installation

Most of the sections that follow apply to all of the SC-207X Series boards. However, several topics
are more board-specific than others. Unless a given topic is delineated by board, the topic applies to
all SC-207X Series boards.

Hardware Installation for the SC-2070 and the SC-2071

The following are general instructions for installing your SC-2070 or SC-2071 board in your computer
DAQ system. Consult the user manual or technical reference manual of your computer for specific
instructions and warnings.

Caution: Turn the host computer off before making any connections.

1.

Determine what signal conditioning is desired for the analog inputs and install the necessary
components into the open component positions. If no signal conditioning is needed on an input,
then the factory-installed jumpers (on the SC-2070) or jumper (on the SC-2071) must be in place.

2.

Check that jumpers W1 and W2 are set correctly for the current application.

3.

Mount the SC-207X Series board into a 19-in. rack (optional).

4.

Connect the SC-207X Series board to the DAQ device using a 50-pin ribbon cable. (If an
SC-205X Series board is used with the SC-207X Series boards, install and mount the SC-205X
Series board as instructed in the SC-205X Series User Manual, then connect the SC-207X Series
board to the SC-205X Series board using the 50-pin cable and connect the SC-205X Series board
to the DAQ device.)

5.

Connect field signals to the SC-207X Series board at the screw terminals.

6.

Attach the appropriate cover to the rack mount (optional).

7.

Turn the computer on.

8.

When finished, turn off any powered external signals to the SC-207X Series board before turning
off the computer.

«
...
68
69
70
71
72
...
»

Содержание SC-207 Series




























































































Отзывы:

Нет отзывов

Похожие инструкции для SC-207 Series

Бренд: Commell Страницы: 36

Бренд: LORD Страницы: 9

Бренд: AMD Страницы: 20

Бренд: Avolites Страницы: 24

AIE900-XNX Series

Бренд: AXIOMTEK Страницы: 53

XM24 Expansion Module

Бренд: Avaya Страницы: 5

Бренд: ACTi Страницы: 14

Бренд: OPTO 22 Страницы: 28

Бренд: Acromag Страницы: 35

Бренд: Alcatel-Lucent Страницы: 60

Бренд: Cypress Semiconductor Страницы: 31

CloudGen Firewall

Бренд: Barracuda Страницы: 8

Бренд: PairGain Страницы: 48

PSJ-VZ58 gen3 OEM

Бренд: Grizzly Страницы: 12

Бренд: IEI Technology Страницы: 146

Бренд: Omnia Страницы: 130

System 200V PC 288

Бренд: VIPA Страницы: 54

EISBLOCK AURORA ACRYL GPX-N RTX 3070 VENTUS INCL

Бренд: Alphacool Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды