NatComm FAXSWITCH 2, Руководство пользователя

Страница: 7 / 20

Page 7 Natcomm
INSTALLATION TRADITIONAL FAXSWITCH
When you use only 1 telephone socket
Please refer to the diagram on page 8
SUITABLE FOR USER INSTALLATION.
1. Unplug all equipment from the telephone socket to be used.
2 . REMOVE the telephone line cord fitted to your FAX DEVICE (unplug
it from the modular connection on your Fax device).
Using the cable you have just removed, CONNECT the modular end of
this cable to the LINE IN port of FAXSWITCH. The other end of the cable
(with the large Telstra format male plug) should be connected to your
telephone line socket.
Use the supplied Modular-Modular line cord to connect the FAX DEVICE
to the FAX MACHINE port of
FaxSwitch 2
. If the Fax Machine has
more than 1 port, use the LINE port.
Connect your telephone to the LINE OUT of
FaxSwitch 2
using the
supplied cable with female socket. If an answering machine is used, fit
this with the telephone using a double telephone adaptor (not included).
Connect the supplied 12VAC Power Adaptor and then switch it ON.
SET your FAX DEVICE to the AUTOMATIC RECEIVE MODE.
SET your FAX DEVICE to ANSWER on the FEWEST RINGS possible. If
Fax/Phone or FaxSwitch settings are provided on your Fax Device,
ensure that they are DISABLED.
If ADSL or CALLERID is used on this telephone line, please refer to
pages 16-17.
READ THIS USER GUIDE thoroughly to obtain a full understanding of the
operation of this device.