Nastec SUND, Инструкция по установке, использованию и техническому обслуживанию

Страница: 7 / 40

2.2. Qualified personnel
WARNING
The installation, use and maintenance of the product are strictly for qualified personnel who have
undergone appropriate training. Any use by unqualified personnel must be carried out under the
approval, responsibility, and close monitoring of the latter.
WARNING
Failure to follow the instructions may result in damage to the product, the system in which it is
installed and, in the worst cases, damage to property or persons with even fatal consequences.
WARNING
Failure to comply with the instructions may lead to loss of warranty.
WARNING
Keep out of the reach of children.
2.3. Safety warnings
WARNING
During installation and use of the product, comply with the general safety regulations, working in a
clean, dry environment, free of hazardous substances and using the appropriate accident prevention
tools (gloves, helmet, goggles, shoes, and whatever else is necessary).
WARNING
The product is suitable for installation in industrial environments. In case of installation in a residential
environment, it is recommended to adopt all the safety precautions required by local regulations.
WARNING
The unsuitable use of the product, non-original spare parts or tampering with the hardware and/or
firmware of the product may lead to serious damage to property or persons in addition to the loss of
warranty. The manufacturer waives all liability due to the improper use of its products.
WARNING
Before commissioning the product, ensure that the installation is safe and in accordance with local
regulations.
WARNING
Comply with the provisions to meet EMC requirements.
WARNING
Use cables of the appropriate type and cross-section according to the electrical characteristics of the
load, the ambient temperature and local regulations.
WARNING
Any insulation tests may only be performed in accordance with the manufacturer's instructions.
Failure to do so may result in damage to the unit.
CAUTION
Electronic boards and components may be damaged by electrostatic discharge. We therefore, rec-
ommend to don't touch the components.
CAUTION
Take care during installation and electrical connection that no foreign bodies enter into the device.
SUND
7