background image

5

NARVON

1.3.3.  Symbols used

GENERAL DANGER WARNING

 

This symbol indicates a danger which may also place the User at risk. In such cases utmost care is 

required and every precaution must be taken in order to operate safely.

DANGER OF ELECTROCUTION

 

This symbol warns the personnel concerned that the operation described may result in an electric 

shock unless all the necessary safety precautions are taken.

IMPORTANT 

This symbol indicates a cautionary note, a note about key functions or useful information. Very close 

attention should be paid to the portions of text marked with this symbol.

PROHIBITED 

This symbol is used to indicate operations that must be avoided as they create hazards for the User 

and any other individuals present in the vicinity.

DO NOT EXTINGUISH FIRES WITH WATER 

The presence of this symbol warns against attempting to extinguish fires with water or any substance 

containing water.

PERSONAL PROTECTION 

When this symbol appears alongside a description it means that personal safety equipment must be 

used, as there is an implicit risk of accidents.

SPECIALIZED TECHNICIAN  

This symbol identifies operations that may be performed only by qualified technical personnel.

MOVING MACHINE PARTS 

This symbol identifies the danger due to moving parts existing in the machine.

Содержание SLUSHY 378SM2





























Отзывы: