11
NARVON
5.4. Electrical connection
This job may be performed only by specialized
technical personnel.
Before plugging in the machine, make sure that the main
switch is on “0”.
The purchaser/user is responsible for making the electrical
connection.
The machine must be connected to the electricity mains
by means of the plug fitted on the power cord. Be sure to
comply with:
• the data shown on the rating plate on the side machine.
Warning: The electric outlet must be situated
in a place easily within reach of the user,
so that no effort is required in order to
disconnect the machine from the power
supply when necessary.
If the power cord is damaged, you must have it replaced
either by the manufacturer or a specialized technician
It is forbidden:
•
to use extension cords of any type;
•
to replace the original plug;
•
to use adapters.
6. OPERATION
Before the machine may be started up for the first time,
specialized technical personnel must check that it functions
properly.
6.1 Preparing the product
Warning: Product must be poured into the
bowl only when the machine is off and
unplugged.
Fig.6 Never only use water
Dilute and mix the CONCENTRATE with WATER in a
suitable container. THE MIXTURE OBTAINED MUST HAVE
A MINIMUM SUGAR CONTENT OF 13° BRIX - A lower
concentration may damage the augers and/or gearmotors.
To remove the lid from the bowl, follow these instructions:
Prior to filling the bowl with product, the lid must be
removed by being lifted off of the unit.
Warning: Do not force the lid opening
in case of difficulty.
