24
NARVON
After removing the panel, use a dry brush to remove the dust
that has built up over time with use. (Fig.49)
Once the condenser has been thoroughly cleaned, fit the
panel back in position.
7.10. Periodic maintenance
The machine must be periodically checked
(at least once a year) by a specialized
technician. This periodic check serves to
ensure that all the components installed and
the machine itself are maintained at a high
level of safety.
Any worn components must be replaced by an
original spare part.
It is forbidden to use the machine when
even only one of its components is faulty or
worn. Users are forbidden to perform periodic
maintenance.
8. Disposal
Electric and electronic equipment must be
disposed of in accordance with the EPA.
Such equipment may not be disposed of
as normal municipal solid waste but must
rather be separately collected to optimize
recovery and recycling of the materials used
to manufacture them.
All products are marked with the crossed out wheeled
bin symbol
as a reminder of separate collection
obligations.
Correct observance of all of the provisions for the disposal
of end-of-life products will contribute to safeguarding the
environment.
Fig. 49
