18
NARVON
The machine must be cleaned at least once a
day. If the machine is not used continuously
throughout the day, wipe the dispensing tap
area and the product outlet pipe with a clean
cloth and sanitizing fluid, as illustrated in the
figure below.
While the components of this machine are
designed to make them easy to clean, germs
and mold can still build up in the event of
inadequate cleaning.
It is forbidden to clean or service the machine
when it is plugged in and the main switch is
positioned on 1- .
7.1. Emptying the bowls
Before a bowl may be cleaned, it must be emptied of the
previously prepared product.
If the bowl is to be cleaned prior to the first use of the
machine, it need not be emptied. In such a case refer
directly to Section 7.2.
For the sake of simplicity only the operation of the right
bowl will be illustrated; to operate the other bowls simply
carry out the same sequence of steps on the switches of the
bowl in question.
With the machine switched on, put the freeze/cool
changeover switch
on “O”, and empty the bowl of all its
contents.
Fig.25
Fig.26
PULL
PUSH
Product
