NARGESA MX700, Инструкция, Страница: 17 / 41

INSTRUCTION BOOK HYDRAULIC PUNCHING MACHINE MX700 16
6. WARNINGS
The MX700 is equipped with a safety screen to prevent projected elements from causing any damage to
the machine operator. This screen can only be raised for the preparation of tools, dies or punches, the
machine can operate whenever the key is in "ON" position, this key is always to be controlled by the
person responsible for the section or area in which the machine is located.
When the key is set to "On" a red light warning lights on the front indicating that security is bypassed.
-Do not touch any part of the machine running.
-Do not use the machine for other purposes but the ones described in this manual.
-Use gloves when handling and machine components during punching processes
-Wear safety glasses and protective boots approved by the EC.
-Hold the material at the ends, never by the part of the punching.
-Do not work without the protections fitted to the machine. (Never punch without the extractor)
-Maintain a safe distance between the machine and the operator during the time the machine is running.
-Do not use punches or tooling that are not provided by Nargesa.
-The tools to be attached to the machine must always be attached to the base and the piston.
-In case of accident by negligence of the operator, not to follow the safety and operating standards set out
in the handbook NARGESA will not take any responsibility.