NARGESA MX700, Инструкция, Страница: 14 / 41

INSTRUCTION BOOK HYDRAULIC PUNCHING MACHINE MX700 13
Once that punching is complete, you can lift the foot off the pedal. However, in this mode of operation,
unlike the above, the piston rod returns back to its rest position, starting the climb to the Superior FC is
activated.
You should note that this mode also allows you to go work by lowering the rod slowly to adjust the descent,
by positioning the Lower inductive. Whenever you hold the pedal rod takes a downward movement will be
stopped only when the above inductive l Final Race is activated. When you lift your foot off the pedal, the
rod movement reverses and begins the ascent.
5.6. Meter deletion
The MX700 has a counter as you know, if you have carefully read the foregoing sections. This can be very
favorable in case you need to count the punching operations, this requires a certain part, or the ones a third
user has made with your machine a third part with your machine.
Obviously this counter can be deleted. In order to proceed properly and supposing it shows up on the LCD
a message like this one below in which for example, you have done 150 operations, just follow the
instructions indicated below.
Picture 16.Information of the number of operations made
It is important to say that the counter can be always erased whenever the machine is about to work (in
state of StandBy it is not possible), but without performing any operation, the user may proceed thus, in
MANUAL mode or AUTO mode.
The only thing you should do is press the COUNTER key If it does, the message shown on the LCD will
change to this one.
Picture 17. Message with the information of the counter deletion
MANUAL
CNT: 150
Do you want to erase
the counter?