NARGESA MX700, Инструкция

Страница: 12 / 41

INSTRUCTION BOOK HYDRAULIC PUNCHING MACHINE MX700 11
5.1. Introduction
This manual is intended to be useful to the user of the MX700, as it contains important information about
the use and features of the machine. It is for this reason that it is recommended to follow step by step the
points in this manual in order to understand the correct operation of the machine.
5.2. Feeding up of MX700
To give power to the machine, put the March switch in the Connected position. When proceeding, a
message like this will be displayed
Picture 12. Message for activation of the Hydraulic Press
The situation in which the punching machine is currently called StandBy, a state in which the machine is
turned on but remains idle waiting to perform any function.
5.3. Activation of the machine
With the machine already initialized and in StandBy, you can work with it by following the steps detailed
below.
To proceed properly, please press the ON key. When doing so, it will appear on the display
LCD messages like this.
Picture 13. Message of activated Hydraulic Pres
The information represented in the picture above shows, in the top row of the LCD display, the current
mode of punching (Manual or Automatic). In the bottom row there is the counter which is incremented
each time the pedal is pressed down.
NARGESA
MX-700
MANUAL
CNT: 0