NARGESA MX700 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 41

NARGESA MX700 Скачать руководство пользователя страница 15

INSTRUCTION BOOK HYDRAULIC PUNCHING MACHINE MX700 14

Logically, if you press the ESCAPE key, the counter will not be affected, and return to the previous screen.
If instead you want to clear the counter to the question put to him in the previous message, press the
COUNTER key again. The new message is displayed like this on screen.

Picture 18. Information of the deleted counte

5.7. Desactivation of the machine

At any time the machine is turned on and it´s on rest position, you can turn it off. If this is what you want,
please press the OFF button and the machine will be disabled, going to standby (refer to Section 6.2)

5.8. Unusual performance situations

At any time an abnormal operating condition, a situation which by its description implies the stop of any
operation that was performed at that time may occur.

Abnormal situations are divided into two groups, the Emergency Situations and Error. The specific
situations that lead to each of these two groups are shown below

Emergency:

Activating the Emergency Stop button

Picture 19. Information about Emergency Stop

Error situations:

Error on the Upper Displacement of the machine.

Picture 20. Information about Error on the upper Displacement

Counter

deleted

EMERGENCY STOP

ERROR ON UPPER

DISPLACEMENT

«
...
13
14
15
16
17
...
»

Содержание MX700










































Отзывы:

Нет отзывов