NARGESA MP1400 CNC, Инструкция пользователя

Страница: 53 / 77

INSTRUCTIONS BOOK FOR PRESS BRAKE MP1400 CNC 52
To achieve this objective we will select from the Semi automatic menu, the option Operate with Memories”
and then indicate that we want to perform a memory by entering their numerical value, then press
There is a screen below informing you to verify the correct placement of the dies for the folding of the se-
lected memory, check it up and then press the key
Once this has been done, the parameter you want to work with will appear on screen. The ram will be at
the upper limit that has been defined and will remain pending the start of folding. On the graphic display it’ll
show the most relevant information about the fold to be carried out. Now, to start folding, we must make a
push on pedal down, ie, pressing and releasing. With this action, the stop is placed in the correct position
allowing the user to enter the sheet metal that will work.
SELECT A MEMORY
>>>> 1 <<<<
----------------------------------------------------
CHECK IT HAS GOT
- DIE NUMBER?
PUNCH NUMBER?
PRESS ENTER TO CONFIRM
----------------------------------------------------
FOLD 1 TO 4 MEMORY 1
Material Mild Steel
Punch = 2
Die = 2
Angle = +120.0º
Distance = 100.0 mm
Reverse = 0.0 mm
Upper Limit = 20.0 mm
Correction = 0.0º
PUSH THE PEDAL DOWN