13
01.03.2 General requirements
Most accidents can be avoided by observing some elemental standards of safety:
·
If you need to install or remove some parts of the machine, use only lifting and transport machines according to the
weight and characteristics of the machine you need to move. Lifting points of hook are indicated by specific decals
on SUNFLOWER HEADER, as illustrated here.
·
The machine must only be used by qualified and trained people.
·
Before using the SUNFLOWER HEADER, check that all protection and parts are in theys correct position and
properly secured.
·
Do not touch any moving parts when the machine is in motion.
·
Before you start the machine control be sure that any other operator is engaged in maintenance operations and / or
control. Operations the machine must be free from objects not necessary for its operation and which can be
coupled from moving parts during operation.
·
It is forbidden to remove the mechanical protection and safety systems of the header.
·
Before cleaning and / or maintenance of the machine, and before removing any mechanical protection, put in
safety condition the SUNFLOWER HEADER following these instruction:
1. Lower the header to the ground.
2. Stop the engine of the combine, remove the key from the dashboard and wait for the
complete stop.
·
Keep the machine clean by removing any materials that could damage the operation or the operator (stones,
pieces of iron, pipes, etc...).
·
After each cleaning and / or maintenance operation, ensure that you have all the special or generic tools , the
station work is free from objects that are not necessary for its operation and that can be hooked by moving parts of
the machine.
·
The machine must be used by personnel wearing protective devices (eg helmet, shoes, gloves, dust mask), as
expressly stated in the manual of use avoid to wear ties, scarves or any clothing that could become caught in
moving parts.
·
Pay attention to the labels on the machine every time preparing to operate on the same or nearby.
·
The DECALS installed on the machine must always be kept in goodstate. Clean them regularly and replace them
when necessary, addressing to the Pegaso Srl.
Harvesting section
Transmission element: left part
Transmission element: right part
UK
Содержание SUNSTORM SFH600
