nardi SUNSTORM SFH600, Руководство по эксплуатации и обслуживанию

Страница: 23 / 64

25
04.02 Safety Decals
The symbols on the decals must be carefully respected by whoever is preparing to operate on the machine.
Failures to respect the given indications exonerate the manufacturer from
injury or damage that might result to persons or property , and makes the operator himself solely responsible
to the authorities.
The pictograms of obligation, warning, prohibition are placed on the machine in the areas indicated in the following
diagram, the security labels legend is listed below and on the following pages also.
They are intended to immediately alert the operators in an easy and intuitive way, about the risk areas, existing under the
mechanic protection or in particular areas of the machine that can be dangerous for the operators.
With the help of this manual, any operator that will have to interact with the machine must perform a careful inspection
tour around the machine to observe and control location and content of such warnings.
n.
Decal
Description
01
02
03
04
Plate:
Located on the rear upper left shows model, serial number, year of
manufacture and total mass of the machine.
Caution! Read the service manual:
Before starting any work, read use and maintenance manual
carefully. Pay particular attention to the instructions for security
purposes.
Caution! turns number of PTO:
Shows the drive shaft’s turns number to make an
optimal performance.
Danger! Moving parts:
Warns that the machine has some moving parts exposed and
therefore you absolutely must not intervene as long as the
mechanisms are in motion.
UK