Napoleon VPrestige PF450, Руководство пользователя

Страница: 6 / 40

6
LIGHTING PORT
HOLE
(BOTH SIDES)
MAIN
INFRA-RED
BURNERS
RIGHT
IGNITER
REAR
INFRA-RED
BURNER
MAIN
TUBE
BURNERS
LIGHTING INSTRUCTIONS
Open lid.
Ensuring all burner controls are in
the off position, turn on the gas
supply valve.
The propane cylinder is equipped with an excess flow device. Unless all burners are
turned off prior to turning the cylinder on, only small flames will be achievable.
Do not use rear burner while operating any of the main burners.
Rear Infra-Red Burner
Lighting
Main Infra-Red
Burner Lighting
Side Burner Lighting
Remove warming rack.
With valve held in,
push and hold left
igniter switch until rear
burner lights.
Turn pilot burner
control to high
Press and hold left
igniter switch until lit,
or light by match.
Turn front or rear side
burner control to high.
Turn rear burner valve
on, push in, and hold.
If ignition is not
immediate, turn
burner control off.
Wait 5 minutes.
Press and hold right
igniter switch until lit,
or light by match.
Keep valve depressed
for 10-15 seconds and
release.
Once infra-red burner
is lit, leave on high for
5 minute pre-heat
period before adjusting
to medium or low.
If ignition is not
immediate, turn the
burner control off.
Wait 5 minutes.
LEFT
IGNITER
Turn left or right tube
burner control to high.
Press and hold left
igniter switch until lit,
or light by match.
If ignition is not
immediate, turn the
burner control off.
Wait 5 minutes.
With one tube burner
operating in the high
position, turn the
other tube burner
control to high.
If ignition is not
immediate, turn the
burner control off.
Wait 5 minutes.
Once burner is lit, allow
a 5 minute pre-heat
period before adjusting
to med or low.
Once pilot is lit, turn
left and/or right infra-
red burners to high.
PILOT
BURNER
FRONT
SIDE
BURNER
REAR SIDE
BURNER
LIGHTS
Keep pilot on while
operating infra-red
burners. Turn off
after use.
Main Tube Burner
Lighting