Napoleon Luminex Series, Инструкция по установке и эксплуатации

Страница: 26 / 80

W415-4188 / B-0 / 11.13.23
EN
26
operation
Power Turn the appliance on/off.
Flame On/Off Turns the flame on/off.
Settings:
F-3: Style 3 - yellow colour.
F-2: Style 2 - yellow colour.
F-1: Style 1 - yellow colour.
F-0: Flame OFF.
Mode
Selection
Switches between running modes.
Default setting: H-0
Settings:
H-0: Heater and blower off
FAN: Heater is off and blower is on
H-1: Heater and blower on
ECO: Heater running in economic mode
BST: Heater in enhance mode, blower running at high speed
Note: Heater control function can be enabled/disabled by holding the button for 3s. When
the heater function is disabled, “LOC” will be displayed.
Thermostat
Control
Press this button once, temperature setting will increase 1°C (2°F). Start from 18° C
(64°F). Hold this button for 5s, can switch between °C/°F.
When temperature reaches 27°C, press this button once again, temperature will turn off
and display unit. Press button again to restart from 18 (deg) C.
Settings:
18ºC [64ºF], 19ºC [66°F], 20°C [68ºF], 21ºC [70ºF], 22ºC [72ºF], 23ºC [74ºF], 24ºC [76ºF],
25ºC [78ºF], 26ºC [80ºF],
27ºC [82ºF] and OFF.
Note: Press and hold the button for 5s to switch between ºC and ºF.
6.3 operating wall-mount control