Napoleon Luminex Series, Инструкция по установке и эксплуатации

Страница: 22 / 80

W415-4188 / B-0 / 11.13.23
EN
22
wiring diagram
Power Turn the appliance on/off.
Heater Turns the heater and blower on/off.
Settings:
H-0: Heater and blower off.
H-1: Heater and blower on.
FAN: Heater is off and blower is on.
Note:
Heater control function can be enabled/disabled by holding the button for
5s. When the heater function is disabled, “LOC” will be displayed.
Flame Turn the flame effect on/off.
Settings:
F-3: Style 3 - yellow colour.
F-2: Style 2 - yellow colour.
F-1: Style 1 - yellow colour.
F-0: Flame OFF.
ECO Mode
Indicator
Indicates the appliance is working under ECO mode (energy saving).
Boost Mode
Indicator
Indicate the appliance is working under Boost mode.
Wi-Fi Indicator
Indicates the appliance is connected to the wireless network.
Press and hold the button 8s to enter Wi-Fi setup mode. Indicator flashes.
6.0 operation
Once the appliance has been electrically connected to a grounded circuit and the breaker is on,
it is ready to operate.
The control panel is located on the top right-hand corner of the appliance.
6.1 operating control panel
Ensure the house circuit breakers for the power supply are turned on. In the event of a power failure, the
appliance will lose its memory function and will reset to factory mode when the power returns.
attention: