Napoleon Luminex Series, Инструкция по установке и эксплуатации

Страница: 19 / 80

EN
19
finishing
W415-4188 / B-0 / 11.13.23
4.3 media installation
The front glass must be removed and the appliance must be secured in its final location before the crystal embers
are installed (see “front glass installation and removal” section).
• Power supply service must be completed prior to finishing to avoid reconstruction.
• Heat vents and air openings cannot be covered in any circumstances.
WARNING
50
62
74
96
W135-0453 G
W135-1092 E
W135-0459 G
W135-1093 E
W135-0460 G
W135-1091 E
W135-0496 G
W135-1089 E
W135-0497 G
W135-1088 E
W135-0499 G
W135-1090 E
W135-0500 G
W135-1087 E
3
5
6
7
2
4
1
1
2
3
4
5
6
7
4
3
1
5
6
7
1
2
3
4
5
6
3
7
1
2
3
4
5
6
3
7
2
6
Rev A: 07.27.23 second log 7 replaced by log 5 as per Keyur Morthana
5
5
Fig. 7
4.3.1 log set and media installation
1. Start by laying out the 2 types of glass along the media bed. Mix the 2 colours together to create a realistic
burning appearance once fireplace is turned on.
2. Place the logs into desired position. Reference pictures are shown in figure 7 as recommended location.
This can be changed based on desired layout.
3. Place the mineral rocks and charcoal pieces around the logs or in a preferred arrangement.
Recommended Log Set Arrangement