56
W415-0899 / B / 03.13.12
This appliance comes equipped with our “Night Light™”.
If in the event the lamp or lens needs to be replaced, follow these instruc-
tions.
A.
Turn off all electrical supply.
B.
Remove the glass and glass ember tray from the
fi
rebox.
C.
Unscrew the lens cover making sure the gasket stays in place.
NOTE: Do not handle the lamp (bulb) with bare fi ngers,
protect with a clean dry cloth.
D.
The lamp will pull straight out of the socket. Replace with Wolf
Steel Ltd. parts only (W387-0009), as lamp and lens are special
"high temperature" products.
E.
Replace lens cover.
F.
Replace glass and ember tray.
Gasket
14.1 BULB REPLACEMENT BGD36CFG / GD36M
A.
Remove the glass and glass ember tray.
B.
Remove the burner base from the
fi
rebox.
C.
Compress the retainer
fi
ns and lift out the lens assembly. Disconnect the
wires.
D.
Replace lens assembly by aligning key hole and snap into place. Re-
connect the wires.
E.
Re-install burner base ensuring a good
fi
rebox seal.
F.
Re-install glass ember tray and glass.
NOTE: When removing the glass ember tray make sure the glass embers are away from the center of
the screen, exposing the burner, before lifting glass ember tray out.
When replacing burner, absolutely no glass embers can be in cup surrounding the ori
fi
ce.
HINT: If glass falls
into cup and surrounds the orifi ce, insert a clean bag into a vacuum cleaner and vacuum out glass
embers. Replacement glass embers can be ordered from Wolf Steel Ltd.
14.2 LENS ASSEMBLY REPLACEMENT BGD36CFG / GD36M
THE FRONT OF THE APPLIANCE BECOMES VERY HOT DURING OPERATION. LET THE APPLIANCE
COOL COMPLETELY BEFORE CONDUCTING SERVICE.
!
WARNING
KEY HOLE
