Napoleon BGD36CFNTR Скачать руководство пользователя | Manualshive

Страница: 29 / 68

background image

29

W415-0899 / B / 03.13.12

5.7 MOBILE HOME INSTALLATION

This appliance is certi

fi

ed to be installed as an OEM (Original Equipment Manufacturer) installation in

a manufactured home or mobile home and must be installed in accordance with the manufacturer’s
instructions and the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280, in
the United States or the Mobile Home Standard, CAN/CSA Z240 MH Series, in Canada. This appliance is
only for use with the type(s) of gas indicated on the rating plate. A conversion kit is supplied with the mobile
home appliance.

29.1

This Mobile/Manufactured Home Listed appliance comes factory equipped with a means to secure the unit. Built
in appliances are equipped with 1/4” diameter holes located in the front left and right corners of the base. Use #10
hex head screws, inserted through the holes in the base to secure. For free standing products contact your local
authorized dealer / distributor for the appropriate securing kit. For mobile home installations, the appliance must be
fastened in place. It is recommended that the appliance be secured in all installations. Always turn off the pilot and
the fuel supply at the source, prior to moving the mobile home. After moving the mobile home and prior to lighting
the appliance, ensure that the logs are positioned correctly.

This appliance is certi

fi

ed to be installed in an aftermarket permanently located, manufactured (mobile)

home, where not prohibited by local codes.
This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not
convertible for use with other gases, unless a certi

fi

ed kit is used.

Conversion Kits
This appliance is

fi

eld convertible between Natural Gas (NG) and Propane (LP).

To convert from one gas to another consult your Authorized dealer/distributor.

5.8 GAS

INSTALLATION

!

WARNING

RISK OF FIRE, EXPLOSION OR ASPHYXIATION. ENSURE THERE ARE NO IGNITION SOURCES SUCH AS

SPARKS OR OPEN FLAMES.

SUPPORT GAS CONTROL WHEN ATTACHING GAS SUPPLY PIPE TO PREVENT DAMAGING GAS LINE.

ALWAYS LIGHT THE PILOT WHETHER FOR THE FIRST TIME OR IF THE GAS SUPPLY HAS RUN OUT

WITH THE GLASS DOOR OPENED OR REMOVED. PURGING OF THE GAS SUPPLY LINE SHOULD BE

PERFORMED BY A QUALIFIED SERVICE TECHNICIAN. ASSURE THAT A CONTINUOUS GAS FLOW IS AT

THE BURNER BEFORE CLOSING THE DOOR. ENSURE ADEQUATE VENTILATION. FOR GAS AND

ELECTRICAL LOCATIONS, SEE “DIMENSION” SECTION.

ALL GAS CONNECTIONS MUST BE CONTAINED WITHIN THE APPLIANCE WHEN COMPLETE.

HIGH PRESSURE WILL DAMAGE VALVE. DISCONNECT GAS SUPPLY PIPING BEFORE TESTING GAS

LINE AT TEST PRESSURES ABOVE 1/2 PSIG.

VALVE SETTINGS HAVE BEEN FACTORY SET, DO NOT CHANGE.

«
...
27
28
29
30
31
...
»

Содержание BGD36CFNTR





































































Отзывы:

Нет отзывов

Похожие инструкции для BGD36CFNTR

Бренд: Dik Geurts Страницы: 96

Бренд: Faber Страницы: 49

Бренд: Dik Geurts Страницы: 92

Бренд: Continental Fireplaces Страницы: 48

Cosi square glass set M

Бренд: Gimeg Страницы: 2

Бренд: Saey Страницы: 44

Бренд: Majestic Страницы: 20

Бренд: Dimplex Страницы: 20

LATTICE OFW279FR

Бренд: HAMPTON BAY Страницы: 14

Atraflam 16/9eme 600

Бренд: Atra Страницы: 24

PHANTASY TF-1561ERA

Бренд: Capital fireplaces Страницы: 8

Бренд: Rasmussen Страницы: 18

Бренд: Viessmann Страницы: 4

Бренд: Fired Up Corporation Страницы: 16

Бренд: Fire Sense Страницы: 8

Бренд: Fire Mountain Страницы: 45

Бренд: Klarstein Страницы: 32

Бренд: Klarstein Страницы: 71

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды