14
E R AS E AL L Z - W AV E D E V I C E S
To exclude / delete all existing Z-Wave devices:
1.
Tap
Erase All Devices
.
2.
In the
Confirmation
screen, tap
OK
to continue (or tap
Cancel
to exit without erasing devices).
3.
The status message field will indicate "
Defaulting
" and after a short time, "
Default Complete
".
All devices listed in the device table (example shown below) will appear to be removed, however
the memory data within each device will
not
be erased. Therefore, to completely erase the
memory within each Z-Wave device, simply follow the steps detailed in the section "
REMOVE Z-
WAVE DEVICES
" on page 12 for
each device
.
Tap the "back" arrow (at the top left) to return to the
Automation Management
screen.
IMPORTANT:
The addition and removal of thermostats
from the system may cause uncontrolled and undesired
thermostat settings to be in effect.
Napco is not respon-
sible for property damage due to improper thermostat
settings.
Defaulting
Select
Z-Wave
Device
Setup
