NAPCO Freedom F-64, Инструкция по программированию

Страница: 13 / 56

L
NAPCO Security Systems
Freedom F-64 Programming Instructions
Page 13
WI1502A 9/06
DIRECT ADDRESS OVERVIEW
Direct Address Programming allows you to go directly to the address locations (up to 2287) and change the data entries
manually in order to customize your control panel options. Whereas the Easy Menu Driven Program Mode guides you
through limited selections to get you started,
Direct Address Program Mode allows you to change all options directly.
It consists of up to 2287 address locations each with data entry locations as shown in the following diagram (below left).
The data entry location accepts data in one of three formats: Binary, Decimal and Hexadecimal (explained below in
"
Address Mode Displays "). The following diagram (below right) illustrates a Decimal format data entry location (using
an F-64PROG programmer).
ADDRESS MODE DISPLAYS
There are three types of address displays when programming in Direct Entry Program Mode, as follows:
A) Binary (Bit) Format Example
Settings (such as Zone Features) display and accept data in "number" format. For example, Zone Features are
turned on by the pressing of the programmer buttons 1 through 8, with the activated Zone(s) displaying the corre-
sponding decimal digit (replacing deactivated zones which are signified by dashes).
EXAMPLE: BIT Format with the F-64PROG: Program Zones 2, 4, 5 and 7 as Exit/Entry Follower Zones .
DETERMINE THE DATA ENTRIES
1. Referring to ZONE FEATURES in the Programming Worksheets that follow, the Exit/Entry Follower for Zones 1
through 8 are located at address 0916.
DATA ENTRY
LOCATION
ADDRESS
LOCATIONS
0000
0000
TO
2287
DATA ENTRY LOCATION:
(One of three formats):
•
Binary (Bit)
•
Decimal
•
Hexadecimal
DIRECT ADDRESS PROGRAM MODE
F-64PROG Programmer Display Example
0 0 0 0 0 6 0
D
1 2
= ADDRESS LOCATION
1
2
= DATA ENTRY LOCATION
0916 - - - - - - - - B 0916 - 2 - 4 5 - 7 - B
DATA ENTRY LOCATION:
Binary (Bit) Format
•
No zones yet activated
Address
0916
"Exit/Entry
Follower"
Address
0916
"Exit/Entry
Follower"
DATA ENTRY LOCATION:
Binary (Bit) Format
Press
2 4 5
and
7
in order to acti-
vate Zones 2, 4, 5, and 7. (The "B" on the right indi-
cates "Binary" format). Because "bit numbers"
range from 0-7, these "option numbers" 2,4,5 and 7
correspond to "bit numbers" 1,3,4 and 6, respec-
tively.
DI
RECT A
D
DRESS PROGRA
M
MODE