Nanoxia Deep Silence 6 Revision B, Руководство пользователя

Страница: 18 / 22

7.2 Operation of the Active Air Chimney
In order to open the Air Chimney, slid the dial to the “open” position. This automatically
activates the pre-installed case fans under the top cover.
To close the Air Chimney simply slide the tab back in the opposite position. This will also
deactivate the fans.
8. Installing a water cooling solution
In the Deep Silence Nanoxia 6 Rev. B, you can install both in the specially designed mounting
bracket, as well as under the cover radiators or compact water cooling solutions
8.1 Installation of a radiator or compact water cooling solution on the mounting bracket
behind the HDD-cage
Your new PC-case is equipped with a special mounting bracket that is ideally prepared to
receive a 120/140/240/280 mm radiator. It makes it possible to mount a radiator and can be
equipped with up to four fans for maximum heat-dissipation. Including the pre-assembled 2
x 140 mm Nanoxia Deep Silence fans behind the front panel, up to 6 fans provide a superior
cooling performance.
In order to fix a radiator on the Mounting Bracket, you need to remove it first by removing the
four screws, with which the holder is attached to the HDD cage (see chapter 5.3).
Next, set the radiator you would like to install flat on the table. Position the mounting bracket
with the outside on the radiator as seen in the picture below.
Put up to two 120 or 140 mm fans into the Mounting Bracket and connect fans, bracket and
radiator with extra-long screws.
17