Nanoxia Deep Silence 6 Revision B, Руководство пользователя

Страница: 10 / 22

2.2 Utilizing the external 3.5 inch bay
If you for example desire to place a 3.5 inch card reader, you can use one of the two internal
adaptors for this purpose. Please remove the 5.25 inch cover first.
Open the two quick release of the 5.25 inch bay and remove the mounting frame. Then attach
the card reader in the frame, as shown below.
Then place the frame with the card reader back into the slot and lock the quick release. Finally,
attach the included 3.5 inch front panel carefully on top of the card reader.
3. Installation options for hard drives
The Deep Silence 6 Rev. B allows you the decoupled mounting of 16 hard disk drives. A total of
13 x 3.5 inch bays are available. Included is the newly developed 6 x 2.5 inch mounting frame,
which will take three 3.5 inch bays for installation. By using the two 5.25 inch to 3.5 adaptors,
you can mount a total of 18 hard disks drives in your case.
3.1 Mounting of hard drives
Install the 2.5 or 3.5 inch hard drives in the illustrated mounting frames. In order to extract the
frame, squeeze the protruding brackets and pull the slide out gently.
To install a hard drive into a bracket insert the disk so that the connectors point to the back and
attach the hard drive using the screws provided.
For the fitting of 3.5 inch hard drives please
use the holes in Figure 3A (marked red)
For the fitting of 2.5 inch hard drives please
use the holes in Figure 3B (marked red).
Figure 3A Figure 3B
09