Nanoxia Deep Silence 6 Revision B, Руководство пользователя

Страница: 17 / 22

The fan controller is not designed for the operation of powerful fans. Please take this into
account in particular when using fans from other manufacturers. The maximum power per
channel must not exceed 18 watts.
6.2 Operation of the 2-channel fan controller
The sliders for controlling the fans controller
can be found behind the upper front door.
The upper slider controls channel A and the
lower slider controls channel B.
7. The Active Air Chimney
The innovative Nanoxia Active Air Chimney allows the easy dissipation of hot air in case of a
heat buildup under the top cover: Once the Air Chimney is opened, the connected fans are
automatically activated. When the Active Air Chimney is closed, the fans are switched off
again.
7.1 Connecting the fans to the Active Air Chimney
At the back of the motherboard tray, you can find a circuit board to which you can connect up
to three fans. It is powered by a 3-pin Molex connector that is connected directly to the power
supply.
To connect fans to the Active Air Chimney,
first you need to remove the right side panel
(seen from the front) and the top cover
(
see chapter 4.2
). Next, connect the fans to
connectors labeled the F1, F2 and F3 on the
circuit board.
Then put the cover back on the case. As a
last step, please connect the cable from the
switch of the Active Air Chimney back to the
circuit board (see drawing).
FAN3 FAN2 FAN1
POWER SWITCH
EN
15
16