5. Fan assembly
Five 140 mm fans are pre-installed in your new case. You can mount up to twelve fans in total.
We recommend the use of the 120 or 140 mm Nanoxia Deep Silence fans, available separately.
These are technically and visually equivalent to the factory-installed case fans and will work in
perfect harmony with the built-in fan control of your case.
You can, of course, connect the additional fans to the fan controller
(
see Chapter 6
)
or, where
applicable, to the Active Air Chimney
(
see chapter 7
)
.
All air intake openings of the Deep Silence 6 Rev. B are equipped with easy to clean dust
filters. We recommend that you clean them on a regular basis.
5.1 Front Fans
To switch the fans in the front or to clean the dust filters, first open the lower front door. Next,
open the “Easy Access Panel” by pushing slightly on the left side of the panel (
diagram 5A
).
You can remove the fan by pushing away the retaining lugs a little bit from the fan and then
pull the fan out (
diagram 5B
).
The dust filters can easily be pulled out, as you can see here (
diagram 5C
).
Please note, that the filter elements must be fully inserted to guarantee the proper operati-
on of the “Easy Access Panel”.
diagram 5C
diagram 5B
diagram 5A
EN
11
12
Содержание Deep Silence 6 Revision B
Страница 1: ......
Страница 22: ...Nanoxia 2014...
