Nanoxia CoolForce 2, Инструкция по эксплуатации, Страница: 8 / 17

If you want to remove the hard drive cage
in order to install a water cooling radiator,
simply loosen the 4 screws connecting the
cage to the chassis. You can then simply
remove it.
4.3 Utilizing the 2.5 inch mounting trays
Your CoolForce 2 comes with four 2.5 inch mounting trays, which have been specifically
designed to hold SSD drives.
In order to mount an SSD on the tray, first remove the thumbscrews that holds the tray in place
and then the 2.5 inch tray. Place the SSD on the front of the tray and fix it with the included
2.5 inch mounting screws.
In the next step, please put the mounting tray with the attached SSD back inside the case and
fix it with the thumbscrew.
SSD
We strongly recommend using our flat SATA cable with the straight connector, which we
developed especially for this purpose, in order to guarantee a smooth fit of the side panels.
One SATA connector cable is already included, you can purchase additional cables in stores
07