Nanoxia CoolForce 2, Инструкция по эксплуатации

Страница: 14 / 17

Please note that the preinstalled fan control cannot be used to dim the Rigid LED bars.
8.2 Operation of the Rigid LED Bars
If you want to deactivate the LED Rigid Bars,
you can simply use the LED on/off button in
the lower left corner of the case front.
9. Installing a water cooling solution
In the CoolForce 2 case, you can install 240 mm radiators behind the front panel as well as
either 120 mm, 240 mm or 360 mm radiators under the top cover.
9.1 Installation of a radiator or compact water cooling solution behind the front
For the installation, please remove the modular HDD-cage at the bottom ( see Chapter 4.2 ).
Next, please remove the case front ( see chapter 5.1 ) and the dust filter with the attached fans
and remove the fans ( see chapter 6.1 ).
Now you can mount the radiators with the
fans on the dust filter. It is easily possible
to install very thick radiators in a push-
pull-configuration. It might be necessary to
remove the Nanoxia ModuWand for this
(
see chapter 3
).
13