NanoPhotometer C40 Скачать руководство пользователя

Страница: 101 / 133

NanoPhotometer

NP80/N60/N50/C40

User Guide Version 3.1

101

OFTWARE

AINTENANCE

ESET

There is an option to reset the instrument to factory settings. By selecting the reset button a
window will open that says “Reset the NanoPhotometer

?” Selecting the cancel button will close

the window without changing the settings and selecting reset will open a window that will ask
again ”Reset the NanoPhotometer

to factory settings? All data, stored methods and settings

will be lost.” If it is confirmed the factory settings will be restored.

Note:

All stored methods, settings and data on the NanoPhotometer

will be deleted if the reset

option is executed.

OFTWARE UPDATE

Download the software update file from the Implen homepage:

www.implen.de/downloads/

and

copy it to a USB flash drive.

Note

: Make sure that the sample name is NPOS.bin without any additions or extensions like

from multiple downloads, otherwise rename file to be NPOS.bin exactly.

Note

: Save all data on the NanoPhotometer

before updating.

Note

: Make sure that the NanoPhotometer

is connected to power and that the power

connection is not interrupted during the update

It is recommended to do the update via the built-in touchscreen. If the touchscreen is not
available it is also possible to do the update via computer or tablet. In this case it is necessary to
relaunch the NanoPhotometer

software after the reboot of the NanoPhotometer

. For tablets

the WiFi connection needs to be reconnected.

Note

: Always update the firmware of the NanoPhotometer

first and then update the client

software (PC/Mac, smartphone, tablet).

Update procedure:

1. Copy the NPOS.bin file to a USB flash drive into the root folder
2. Insert in the USB flash drive to the USB port of the NanoPhotometer

3. Select Assistance/Software Maintenance
4. Click on “Update” and wait until the NanoPhotometer

reboots

Note

: Once you have updated the firmware of the NanoPhotometer

, please update the client

software (PC/Mac, tablet, smartphone).

REATE

ILE

To create a log file insert a USB flash drive to the USB port of the NanoPhotometer

. Click on

“Create Log File”. The log (NPOS.log) file will be saved on the root folder of the USB flash drive.

Содержание C40






































































































































Результаты поиска

Содержание C40

Отзывы:

Похожие инструкции для C40

Бренды по названию

Популярные бренды

NanoPhotometer C40, Руководство пользователя

Результаты поиска

Содержание C40

Отзывы:

Похожие инструкции для C40

Бренды по названию

Популярные бренды