manualshive.com logo in svg

NanoEnTek JuLI FL, Руководство пользователя

Поделиться
Скачать
NanoEnTek JuLI FL Скачать руководство пользователя страница 6

1.

 

Place the instrument on a flat, dry, and level surface after 

unpacking the instrument.  Allow at least 10 cm (4 inches) of free 
space at the back of JuLI™ FL for the proper ventilation and the 
prevention of overheating of electronic components.

2. 

 

Plug the supplied power cord into the station unit of JuLI™ FL. 

3.

 

  Connect a scope unit to a station unit using the supplied 

connection cable. 

(

*

 For dual monitoring, the 2

nd

 scope unit also should be connected to the station 

unit.)

4.  Plug the power cord into the electrical outlet. Be sure to only 
use the power cord supplied with the instrument. Powering the 
instrument with an unapproved power cord may damage the 
instrument.
5.

  

When JuLI™ FL is ready to use, start JuLI™ FL by turning 

the ON/OFF switch on and pressing the 

Power button

 on the 

station unit. 

Installation

Installing 
JuLI™ FL

2.

3.

3.

       IMPORTANT 

Connect to the 2

nd

 

scope unit after connecting to the 1

st 

scope unit completely. 

JuLI

TM

 FL, Fluorescence Cell History Recorder  ©2013 NanoEnTek Inc.

7

Содержание JuLI FL









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды