ADAM - rWBC ©2013 NanoEnTek Inc.
23
Review and follow the safety instructions below :
· Always ensure that the power supply input voltage matches the voltage available at your
location.
· To avoid the danger of electric shock, install the instrument per the environmental
specifications located in “Technical Specifications”. If water or other material enters the
instrument, the adaptor, or power inlet, disconnect the power cord and contact a service
person.
· Do not touch the main plug or power cord with wet hands.
· This machine is air-cooled so its surfaces become hot during operation. During installation
and use, leave more than 10 cm (4 inches) free around the device.
· Do not install the instrument on a slant or a place prone to vibrations or the risk of instrument
malfunction or damage to the instrument will increase.
· Never insert any objects (especially metallic) into the air vents of the instrument as this could
result in electrical shock, personal injury, and equipment damage.
· Always set the main switch on the power supply unit to OFF before connecting the power cord
to the wall outlet.
· To avoid a potential shock hazard, always connect the grounding terminal of the instrument
and that of the wall outlet properly. The power cord should be connected to a grounded,
3-conductor power outlet.
· Position the device so that there is sufficient length for the cables and their respective
connections.
· Set the main switch to “ O ” (OFF), unplug the power cord, and lock the stage before moving.
· If the instrument is broken or dropped, disconnect the power cord and contact an authorized
service person. Do not disassemble the instrument.
· Only use authorized accessories.
· Use this equipment only as specified in this manual and as specified in any documentation
associated with its components. Use of the equipment in an unspecified manner may result in
damage to the device or injury to the user.
Safety precautions