52
Introduction
Safety Precautions
Safety
Precautions
Review and follow the safety instructions below :
•
Always ensure that the power supply input voltage matches the voltage
available at your location.
•
To avoid the danger of electric shock, install the instrument per the
environmental specifications located in “Technical Specifications”. If water
or other material enters the instrument, the adaptor, or power inlet,
disconnect the power cord and contact a service person.
•
Do not touch the main plug or power cord with wet hands.
•
This machine is air-cooled so its surfaces become hot during operation.
During installation and use, leave more than 10 cm (4 inches) free around
the device.
•
Do not install the instrument on a slant or a place prone to vibrations or
the risk of instrument malfunction or damage to the instrument will in
crease.
• Never insert any objects (especially metallic) into the air vents of the in
stru-
ment as this could result in electrical shock, personal injury, and equip-
ment damage.
•
Always set the main switch on the power supply unit to OFF before con-
necting the power cord to the wall outlet.
•
To avoid a potential shock hazard, always connect the grounding termi-
nal of the instrument and that of the wall outlet properly. The power cord
should be connected to a grounded, 3-conductor power outlet.
•
Position the device so that there is sufficient length for the cables and
their respective connections.
•
Set the main switch to “ O ” (OFF), unplug the power cord, and lock the
stage before moving.
•
If the instrument is broken or dropped, disconnect the power cord and
contact an authorized service person. Do not disassemble the instrument.
•
Only use authorized accessories.
•
Use this equipment only as specified in this manual and as specified in
any documentation associated with its components. Use of the equip-
ment in an unspecified manner may result in damage to the device or
injury to the user.